Job Search

QA Technician / Production Operative (Temporary) Plymouth £13.00 - £14.00 per hour Temporary contract until February 2027, with the potential for a permanent opportunity ⏰ Immediate start available

We are recruiting for a QA Technician, or a Production Operative (with food industry experience) to join a well-established food manufacturing business in Plymouth. This is an excellent opportunity for someone with previous food manufacturing quality experience to join a busy technical team on a long-term temporary contract, with the possibility of a permanent role for the right candidate. If you do not possess quality experience then you will still be considered if you have good production experience in an FMCG industry (training will be provided)

This is a hands-on, role where you will play a key part in maintaining food safety, quality, and compliance standards across production operations.

Key Responsibilities

Conduct routine quality assurance checksComplete GMP audits across production areasCarry out pre-start checksVerify labels and packing specificationsMonitor CCPs and quality control pointsSupport product traceability activitiesPerform hygiene verification checksRaise and report non-conformancesProvide general support to the Technical team as required

About You

To be successful in this role, you will ideally have:

Previous experience in a food manufacturing QA or food quality positionKnowledge of HACCP, GMP, allergen management and food safety standardsExperience completing and reviewing production and quality documentationConfidence to challenge non-compliance and promote best practice on the factory floorExcellent attention to detail and accurate record-keeping skillsReliable attendance and the ability to commute to the Plymouth site consistently

What's on Offer?

Competitive hourly rate of £13.00 - £14.00 per hourImmediate start availableLong-term temporary contract through to February 2027Opportunity to gain Quality experience within a reputable food manufacturing environmentPotential for the role to become permanent

If you have experience within food manufacturing quality assurance and are available to start at short notice, we'd be keen to hear from you.

#IND-HL-25

Butler Rose is committed to equality in the workplace and is an equal opportunity employer.
Butler Rose Ltd is acting as an Employment Business in relation to this vacancy.

Read less

Process Owner - Manufacturing Engineering

Exeter Area | £40,000 - £45,000 | Monday to Friday, 8:00am - 4:00pm

Butler Rose is delighted to be recruiting on behalf of a well-established and highly respected manufacturing organisation for a Process Owner to join their engineering and production team.

This is an excellent opportunity for either an experienced manufacturing professional, or a graduate with a relevant degree and experience in industry

The Purpose of the role will be to take ownership of critical production processes, drive continuous improvement initiatives, and support the delivery of high-quality products within a fast-paced manufacturing environment.

The Role

As Process Owner, you will be responsible for ensuring manufacturing processes are controlled, compliant, efficient, and continuously improving. Working closely with production, engineering, quality, and supply chain teams, you will play a key role in process optimisation, problem-solving, and operational excellence.

Key responsibilities include:

Ensuring manufacturing and chemical processes are carried out in accordance with approved methods, materials, and equipment standards.Monitoring and reporting process performance metrics and audit results.Championing process management and continuous improvement activities across the department.Managing incoming process materials and supporting the approval and implementation of new materials.Working closely with Supply Chain to maintain material availability and identify suitable alternatives when required.Leading the implementation of new processes, equipment, and capital projects.Maintaining and approving departmental procedures, process documentation, and operating instructions.Supporting training activities and maintaining compliance with training requirements.Collaborating with engineering teams to resolve technical and manufacturing issues.Conducting root cause investigations and implementing corrective actions.Managing departmental PFMEA activities and risk reduction plans.Supporting 5S, TPM, OEE measurement, and lean improvement initiatives.Participating in Kaizen and continuous improvement projects focused on cost, productivity, quality, and waste reduction.

About You

To be successful, you will ideally have:

A minimum of 2 years' experience within a complex manufacturing or engineering environment - ideally casting.HNC minimum qualification in an engineering discipline (degree preferred).Strong understanding of process control, manufacturing methods, and continuous improvement techniques.Experience of Lean Manufacturing, Six Sigma, Kaizen, process management, value stream mapping, or similar improvement methodologies.Excellent problem-solving and root cause analysis skills.Strong communication skills with the ability to work across multiple departments.Good IT skills including Microsoft Excel and other data analysis tools.Awareness of health and safety requirements within a manufacturing environment.

Package & Benefits

Salary: £40,000 - £45,000Monday to Friday, 8:00am - 4:00pmPension Salary Sacrifice SchemeBonus SchemePrivate Medical CoverHealth Cash PlanLife Assurance25 days annual leave plus bank holidays3-day Christmas shutdownAnnual salary reviews

If you are an experienced process-focused engineering professional looking to join a forward-thinking manufacturing business where continuous improvement is genuinely valued, we'd like to hear from you.

Apply today through Butler Rose for a confidential discussion.

#IND-HL-25

Butler Rose is committed to equality in the workplace and is an equal opportunity employer.
Butler Rose Ltd is acting as an Employment Business in relation to this vacancy.

Read less

Operations Director

Torquay

Butler Rose is delighted to have been exclusively appointed to support a well-established manufacturing business in the South Devon area to recruit an Operations Director.

This is a pivotal appointment for an experienced operational leader who enjoys driving change, creating structure and improving performance within a growing manufacturing environment. In the role, you will take overall responsibility for operations and play a key role in shaping the next stage of the company's development.

The organisation produces engineered products for a diverse customer base and is looking for someone capable of bringing stability, accountability and operational excellence across the business.

This role would suit an individual with a background in engineering, technical manufacturing, industrial manufacturing, precision manufacturing, electronics, aerospace, defence, automotive or other complex manufacturing sectors.

The Role

As Operations Director, you will lead the operational functions of the business, ensuring that products are delivered safely, efficiently and on time whilst driving ongoing improvements in performance, cost and customer satisfaction.

You will inherit a capable team and be tasked with strengthening processes, improving operational visibility and developing an environment where teams are empowered, accountable and focused on results.

This is a hands-on leadership position for someone who enjoys solving problems, implementing structure and leading transformation rather than simply maintaining the status quo.

Key Areas of Focus

Driving operational performance and improving customer delivery.Creating robust planning, production and supply chain processes.Developing effective KPI reporting and performance management.Improving inventory control, material flow and supplier performance.Maximising the value of ERP and business systems.Leading continuous improvement initiatives across the operation.Building capability and accountability within operational teams.Supporting future growth through scalable systems and processes.Working closely with commercial and engineering teams to improve business performance.

About You

We are interested in speaking with candidates who can demonstrate:

Experience leading manufacturing operations at a senior level.A track record of improving operational performance and delivery.Strong understanding of manufacturing, planning, procurement and supply chain activities.Experience introducing or improving business systems and operational processes.The ability to lead, motivate and develop teams through change.Commercial awareness and a strong focus on operational efficiency.A hands-on leadership style with excellent problem-solving skills.

Previous experience as an Operations Director, Head of Operations, Manufacturing Director, Site Director, General Manager or Operational Excellence Leader would be highly relevant.

What's on Offer?

£80,000 - £90,000 DOESite based permanent role Opportunity to shape the future direction of the business.Broad remit covering operations, production and supply chain.A chance to deliver meaningful change and leave a lasting impact.

If you're an experienced operational leader looking for an opportunity to drive transformation within a technical manufacturing environment, we'd be pleased to hear from you.

Contact Butler Rose today for a confidential discussion.

#IND-HL-25

Butler Rose is committed to equality in the workplace and is an equal opportunity employer.
Butler Rose Ltd is acting as an Employment Business in relation to this vacancy.

Read less

Operations Director

Torquay

Butler Rose is delighted to have been exclusively appointed to support a well-established manufacturing business in the South Devon area to recruit an Operations Director.

This is a pivotal appointment for an experienced operational leader who enjoys driving change, creating structure and improving performance within a growing manufacturing environment. In the role, you will take overall responsibility for operations and play a key role in shaping the next stage of the company's development.

The organisation produces engineered products for a diverse customer base and is looking for someone capable of bringing stability, accountability and operational excellence across the business.

This role would suit an individual with a background in engineering, technical manufacturing, industrial manufacturing, precision manufacturing, electronics, aerospace, defence, automotive or other complex manufacturing sectors.

The Role

As Operations Director, you will lead the operational functions of the business, ensuring that products are delivered safely, efficiently and on time whilst driving ongoing improvements in performance, cost and customer satisfaction.

You will inherit a capable team and be tasked with strengthening processes, improving operational visibility and developing an environment where teams are empowered, accountable and focused on results.

This is a hands-on leadership position for someone who enjoys solving problems, implementing structure and leading transformation rather than simply maintaining the status quo.

Key Areas of Focus

Driving operational performance and improving customer delivery.Creating robust planning, production and supply chain processes.Developing effective KPI reporting and performance management.Improving inventory control, material flow and supplier performance.Maximising the value of ERP and business systems.Leading continuous improvement initiatives across the operation.Building capability and accountability within operational teams.Supporting future growth through scalable systems and processes.Working closely with commercial and engineering teams to improve business performance.

About You

We are interested in speaking with candidates who can demonstrate:

Experience leading manufacturing operations at a senior level.A track record of improving operational performance and delivery.Strong understanding of manufacturing, planning, procurement and supply chain activities.Experience introducing or improving business systems and operational processes.The ability to lead, motivate and develop teams through change.Commercial awareness and a strong focus on operational efficiency.A hands-on leadership style with excellent problem-solving skills.

Previous experience as an Operations Director, Head of Operations, Manufacturing Director, Site Director, General Manager or Operational Excellence Leader would be highly relevant.

What's on Offer?

£80,000 - £90,000 DOESite based permanent role Opportunity to shape the future direction of the business.Broad remit covering operations, production and supply chain.A chance to deliver meaningful change and leave a lasting impact.

If you're an experienced operational leader looking for an opportunity to drive transformation within a technical manufacturing environment, we'd be pleased to hear from you.

Contact Butler Rose today for a confidential discussion.

#IND-HL-25

Butler Rose is committed to equality in the workplace and is an equal opportunity employer.
Butler Rose Ltd is acting as an Employment Business in relation to this vacancy.

Read less

Butler Rose is committed to equality in the workplace and is an equal opportunity employer.
Butler Rose Ltd is acting as an Employment Business in relation to this vacancy.

Read less

Quality Engineer

Location: Plymouth area
Sector: Manufacturing
Recruiter: Butler Rose (on behalf of our client)

Butler Rose is delighted to be working with an esteemed and well‑established manufacturer in the Plymouth area to recruit a Quality Engineer. This is an excellent opportunity to join a quality-focused organisation with a strong reputation for engineering excellence, continuous improvement, and employee development.

The Role

Reporting into the Quality & Compliance Manager, the Quality Engineer will play a key role in supporting, maintaining and improving the Quality Management System across the business. You will work closely with production, engineering, suppliers and customers to ensure products and processes meet both internal standards and customer requirements.

This is a hands-on role suited to someone who enjoys being visible on the shop floor, analysing data, solving problems, and driving robust corrective actions.

Key Responsibilities

Support the ongoing development and improvement of the Quality Management SystemIdentify trends, risks and non-conformance through data analysis, monitoring and auditingConduct root cause analysis and implement effective corrective and preventive actionsSupport defect management, including containment actions and production decision makingCarry out audits, inspections, measurements and tests to required standardsProduce clear, accurate and data-driven reports on quality performance and improvement actionsWork cross-functionally with production, engineering, suppliers and customers to resolve quality issuesSupport New Product Introduction (NPI), including APQP and PPAP activitiesProvide quality support to production, including SPC data analysis, scrap reduction initiatives and first-off supportAssist with document control and internal and external audit activitiesContribute to quality-related training and continuous improvement initiatives

About You

To be successful in this role, you are likely to have:

A qualification at BTEC, HNC or equivalent level in Engineering, Science or a related discipline, or relevant industry experienceAt least 3 years' experience in a Quality Engineering role within a manufacturing or precision engineering environmentStrong working knowledge of quality tools such as 8D, FMEA, SPC, MSA and PPAPExperience working with ISO standards (ISO 9001 essential; ISO 14001 / ISO 45001 advantageous)Confidence using Microsoft Word, Excel and PowerPointStrong communication skills and the ability to work effectively across departmentsA proactive, detail-focused approach with the ability to work to deadlinesSix Sigma training (Green or Black Belt) is desirable but not essential

Benefits

Salary up to £40,000 depending on experience25 days holiday + bank holidays, increasing to 28 days after one year's serviceEnhanced pension schemeHealthcare benefitsOpportunity to work with a respected manufacturer offering stability and progression

Apply

If you're a Quality Engineer looking to take the next step in your career within a high-quality manufacturing environment, we'd love to hear from you.

Apply today or contact Butler Rose for more information.

#IND-HL-25

Butler Rose is committed to equality in the workplace and is an equal opportunity employer.
Butler Rose Ltd is acting as an Employment Business in relation to this vacancy.

Read less

Quality Engineer

Location: Plymouth, Devon
Salary: £38,000 - £50,000 + bonus
Contract: Permanent, full time (39 hours per week, Monday to Friday)

Butler Rose is delighted to be supporting a leading engineering and manufacturing business based in Plymouth in their search for an experienced Quality Engineer.

This is a key role within the quality function, offering the opportunity to work across the full product life cycle in a technically advanced manufacturing environment supplying high‑profile customers.

The Opportunity

The Quality Engineer will play a pivotal role in ensuring quality is embedded at every stage - from new product introduction through to end of life. Working closely with internal stakeholders and external customers, the role supports robust quality systems, effective problem solving, and continuous improvement across manufacturing operations.

You'll contribute to safe, efficient, and lean manufacturing processes, while helping ensure products consistently meet customer and regulatory requirements.

Key Responsibilities

Promote and support a safe, compliant, accident‑free working environmentEnsure NPI objectives are met, including product and process qualificationSupport successful transfer of new products into mass productionLead customer complaint investigations and implement effective corrective actionsProvide customer‑facing quality support where requiredSupport internal and external auditsApprove qualification of new machinery, processes and productsComplete PPAP requirementsApply structured problem‑solving methodologies with confidence and resilienceWork collaboratively across departments to drive continuous improvement

About You

We're keen to speak with Quality Engineers from a manufacturing or engineering background who are confident working cross‑functionally and engaging with customers.

Essential experience:

HNC or higher qualification in an engineering disciplineMinimum of 3 years' experience in a Quality roleKnowledge of measurement techniques and Gauge R&RExperience conducting Cp / Cpk studiesUnderstanding of process audits, OBA and end‑of‑line inspectionsAbility to interpret engineering drawings, including critical dimensions and weld identificationExperience using structured problem‑solving methodologiesInternal auditor experienceStrong written and verbal communication skills

Desirable experience:

Six Sigma Green or Black BeltISO 9001 Lead or Internal Auditor qualificationKnowledge of ISO 9001, ISO 14001 and ISO 45001Experience supporting structured NPI launch processesFMEA experienceCQI qualifications

What's On Offer

Salary of £38,000 - £50,000, dependent on experienceCompany‑wide bonus linked to attendance, productivity and quality33 days annual leave (including bank holidays) with holiday purchase schemeLife assurancePension contributions matched up to 5%Health and well being benefitsAccess to flexible rewards and smart spending platformSupportive, collaborative working environment with ongoing development

Additional Information

This role is not eligible for visa sponsorshipApplicants must have existing right to work in the UK

How to Apply

If you're an experienced Quality Engineer looking for a technically interesting role with real impact, we'd love to hear from you.

Please apply via Butler Rose with an updated CV.

#IND-HL-25

Butler Rose is committed to equality in the workplace and is an equal opportunity employer.
Butler Rose Ltd is acting as an Employment Business in relation to this vacancy.

Read less

Quality Engineer

Location: Plymouth area
Sector: Manufacturing
Recruiter: Butler Rose (on behalf of our client)

Butler Rose is delighted to be working with an esteemed and well‑established manufacturer in the Plymouth area to recruit a Quality Engineer. This is an excellent opportunity to join a quality-focused organisation with a strong reputation for engineering excellence, continuous improvement, and employee development.

The Role

Reporting into the Quality & Compliance Manager, the Quality Engineer will play a key role in supporting, maintaining and improving the Quality Management System across the business. You will work closely with production, engineering, suppliers and customers to ensure products and processes meet both internal standards and customer requirements.

This is a hands-on role suited to someone who enjoys being visible on the shop floor, analysing data, solving problems, and driving robust corrective actions.

Key Responsibilities

Support the ongoing development and improvement of the Quality Management SystemIdentify trends, risks and non-conformance through data analysis, monitoring and auditingConduct root cause analysis and implement effective corrective and preventive actionsSupport defect management, including containment actions and production decision makingCarry out audits, inspections, measurements and tests to required standardsProduce clear, accurate and data-driven reports on quality performance and improvement actionsWork cross-functionally with production, engineering, suppliers and customers to resolve quality issuesSupport New Product Introduction (NPI), including APQP and PPAP activitiesProvide quality support to production, including SPC data analysis, scrap reduction initiatives and first-off supportAssist with document control and internal and external audit activitiesContribute to quality-related training and continuous improvement initiatives

About You

To be successful in this role, you are likely to have:

A qualification at BTEC, HNC or equivalent level in Engineering, Science or a related discipline, or relevant industry experienceAt least 3 years' experience in a Quality Engineering role within a manufacturing or precision engineering environmentStrong working knowledge of quality tools such as 8D, FMEA, SPC, MSA and PPAPExperience working with ISO standards (ISO 9001 essential; ISO 14001 / ISO 45001 advantageous)Confidence using Microsoft Word, Excel and PowerPointStrong communication skills and the ability to work effectively across departmentsA proactive, detail-focused approach with the ability to work to deadlinesSix Sigma training (Green or Black Belt) is desirable but not essential

Benefits

Salary up to £40,000 depending on experience25 days holiday + bank holidays, increasing to 28 days after one year's serviceEnhanced pension schemeHealthcare benefitsOpportunity to work with a respected manufacturer offering stability and progression

Apply

If you're a Quality Engineer looking to take the next step in your career within a high-quality manufacturing environment, we'd love to hear from you.

Apply today or contact Butler Rose for more information.

Butler Rose is committed to equality in the workplace and is an equal opportunity employer.
Butler Rose Ltd is acting as an Employment Business in relation to this vacancy.

Read less

Butler Rose is delighted to be supporting a leading advanced manufacturing organisation in the recruitment of two Product Engineers to join their growing Ceramic Core Engineering team in Exeter.

This is an exciting opportunity to play a key role in driving technical excellence within a highly specialised manufacturing environment, supporting both new and existing product lines while contributing to continuous improvement and operational performance.

The Role

Reporting to the Core Technical Manager, you will take technical ownership of a portfolio of ceramic core products, ensuring they meet stringent dimensional, quality, and production requirements.

You'll be instrumental in improving manufacturing processes, reducing scrap and rework, and supporting the introduction of more complex, high-performance products.

Key Responsibilities

Support the production of high-quality ceramic core productsDrive continuous improvement across product and process performanceConduct root cause analysis to reduce scrap and reworkImplement and maintain engineering best practicesEnsure products meet dimensional and process requirements for casting applicationsProduce qualification reports and analyse scrap/rework trendsWork closely with customers, suppliers, and internal teams to resolve technical issuesManage individual product programmes and timelinesTroubleshoot manufacturing issues and support process optimisationContribute to cost reduction through process improvements

About You

We're looking for a proactive and detail-oriented engineer with a strong manufacturing or product engineering background.

You will ideally have:

4+ years' experience in a relevant engineering environmentDegree, HNC/HND, or equivalent in an Engineering disciplineExperience with tooling design and/or CAD / 3D modellingKnowledge of injection moulding and/or ceramics processingUnderstanding of Lean Manufacturing and Six Sigma principlesFamiliarity with manufacturing systems and production processesStrong reporting and documentation skillsHigh level of IT literacy (e.g. Word, Excel, Project)Excellent communication and teamwork abilitiesStrong organisational skills and attention to detailSound judgement and problem-solving capability

Why Apply?

Opportunity to work on technically advanced productsBe part of a growing and evolving engineering functionGain exposure to complex manufacturing challenges and innovationWork within a collaborative, forward-thinking environment

Package

Salary up to £45,000 DOEPerformance related bonusEnhanced leave entitlement and pensionHealthcareFurther opportunities for career development

If you're an engineer looking to take the next step in a challenging and rewarding manufacturing environment, we'd love to hear from you.

👉 Apply now or contact Butler Rose for more information.

#IND-HL-25

Butler Rose is committed to equality in the workplace and is an equal opportunity employer.
Butler Rose Ltd is acting as an Employment Business in relation to this vacancy.

Read less

NPI Project Manager - Plymouth | £50,000-£52,000 + Bonus

Butler Rose is partnering with a leading manufacturer based in Plymouth to recruit an NPI Project Manager. This is a pivotal role for someone who thrives on driving new products from concept through to successful launch in a complex, fast-paced manufacturing environment.

The opportunity

You'll be the crucial link between product development and manufacturing, leading cross-functional teams to deliver new products on time, within scope and budget. Working closely with engineering, operations, supply chain, quality and commercial teams, you'll have real influence over some high-profile, technically challenging programmes.

Key responsibilities

Lead cross-functional teams to deliver new products on time, within scope and budgetDevelop and maintain detailed project plans, timelines and resource allocationsDrive project governance through phase-gate reviews, risk assessments and issue resolutionDefine project requirements and deliverables with customers, design and commercial teamsCoordinate prototype builds, testing, validation and pilot productionTrack and report project performance via KPIs and dashboards for senior stakeholdersManage changes to scope, schedule and costs through robust change control processesEnsure compliance with internal processes, industry standards and regulatory requirementsSupport transfer to production and launch readiness, including documentation and supply chain ramp-up

What we're looking for

Essential:

Degree in Engineering, Business, Project Management or a related fieldSubstantial project management experience, ideally in a manufacturing environmentStrong understanding of product development life cyclesProficiency in project management tools and NPI processesExcellent leadership, communication and organisational skillsStrong problem-solving ability and attention to detail

Desirable:

PMQ or equivalent project management certificationSAP experience

What's on offer

Salary of £50,000-£52,000 plus bonus33 days annual leave (including bank holidays) plus holiday purchasing schemeLife insurance at 3x salaryPension contributions matched to 5%Westfield Health provisionSmart Spending platform access

How to apply

Please apply through Butler Rose. All applications are handled in strict confidence.

#IND-HL-25

Butler Rose is committed to equality in the workplace and is an equal opportunity employer.
Butler Rose Ltd is acting as an Employment Business in relation to this vacancy.

Read less